Soundproofing for Walls with the Phonewell Direct to Wall Soundproofing Solution for Wall Noise Reduction

Phonewell Acoustic Insulation by Acara Concepts

Soundproofing with Phonewell Acoustic Insulation - The Natural Sound Insulation

Stockists throughout the UK and Ireland. Contact Us

TEL:

IRE + 353 (0)1 8409 286

UK 07985 195667

Home
About Phonewell®
Technical Data
Applications
Soundproofing Walls
Soundproofing Floors
Soundproofing Ceilings
Timber Frame
Steel Studding
Solid Block
Gallery
Soundproofing Tips
Cutting Phonewell ®
Finish Surfaces
Flanking Noise
Links
Site Map
Contact us

Building Shows:

Soundproofing at the Self Build and Renovate show


	Direct to Wall Soundproofing
	Meets building regulations but where space permits, choose a wider solution from the slimline soundproofing wall solutions to attain even higher wall noise reduction.
		Direct to Wall Solution 27.5mm - 30mm Application: Best slimline performance, for absolute minimal loss of living space where the following wider options are not possible, e.g. remedial solution to meet building regulations. Construction (Brick or Block Wall): - wall with or without existing plaster or plasterboard. - 15mm Phonewell® Acoustic Insulation. - 12.5mm or 15mm sound resistant plasterboard.
	Materials List (available from our stockists) - Phonewell® acoustic insulation (1200mm x 800mm x 15mm) - sound resistant plasterboard (2400mm x 1200mm x 12.5/15mm) - adhesive foam and foam gun (approx. coverage per can is 15m²) - secondary 6mm hammer fixings Instructions: (have you considered Flanking Noise?) 1. Make existing wall sound by removing any loose material. 2. Bond Phonewell® to existing wall with a quick setting adhesive foam butting panels closely. Do not leave any gaps. See Cutting Phonewell. 3. Bond plasterboard to Phonewell® with a quick setting adhesive foam, being careful to stagger joints and leaving a 5mm perimeter gap around floor, walls and ceiling. Optionally add second layer of plasterboard. 4. Secure plasterboard to wall with a few secondary mechanical hammer fixings, do not over tighten. 5. Seal 5mm perimeter gaps with flexible mastic or acoustic sealant. 6. Tape and seal all plasterboard joints and fill screw heads. 7. Fit skirting boards ensuring no contact with the floor – leave a 2mm gap.

Sound Insulation the Natural Way